You would only need one set of the Andersen Camper Leveler, part # AM3604 for your motorhome. You would need to use this on the outside set of wheels on your motorhome that needs to be raised up to level the trailer.
Check out the install video I attached for more info. view full answer...
Typically motorcycle wiring has the brake lights and the turn signals on separate wires which is the opposite of trailer wiring which has them on the same circuit. Since you have combined circuits that you want to be separate for the third brake light to illuminate you'd need a converter like # 118158 and you'd be set. view full answer...
We have exactly what you need in the 4 Pole Harness and Hardwire Kit # C59496.
Since your Honda Goldwing GL1800 has the stop light function separate from the turn lights you need this kit to combine the stop and turn signals like how your trailer is wired. To install it you will need to connect the following wires to the following functions on your Goldwing:
Green - Right Turn
Yellow - Left Turn
Brown - Running/Tail Lights
Thin Red - Stop or Brake Lights
White - Ground
The Thick Red... view full answer...
Your Goldwing has the stoplight circuits separate from the turn signals so you would need a signal converter if you were wanting to add stop/turn/running lights to the bike. For that you'd want the Roadmaster kit part # RM-732. view full answer...
The Hopkins Tail Light Converter Kit # HM48925 will allow you to connect to the wiring on your 2015 Honda Gold Wing. This will give you the common 4-way flat wiring connector that is used by most small trailers. It uses a powered converter to tie into the battery and send power for the lighting from the battery rather than putting excess strain on the factory wiring.
The Hopkins Fold-Over Mounting Bracket for 4-Way Flat Trailer Connector # HM48595 will allow you to secure the 4-way on... view full answer...